The grease Litol-24 (GOST 21150-87) is petroleum oil viscosity 60-75 cSt at 50 °С thickened with lithium soap 12-hydrozystearine acids; contains antioxidizing and viscous additives. The basic operational characteristics: high colloid, chemical and mechanical stability, the water rack even in boiling water, at heating is not strengthened. It is efficient at temperatures from -40 … +120°С, quickly saves working capacity at temperature 130 °С. The application: bearings of a rolling and sliding of all types, hinges, gear and other transfers, friction surfaces knee and caterpillar vehicles, industrial mechanisms, electric machines, etc.
Appearance and color: Homogeneous ointment from light brown to dark brown color
Effective viscosity, Pas, at -20°C, not more than: 650
Effective viscosity, Pas, at 0 °С, not more than: 280
Effective viscosity, Pas, at 50 °С, not more than: 8
Strength at 20 °С, Pas, not less than: 500-1000
Strength at 80 °С, Pas, not less than: 200
Drop temperature, °С, not lower than: 185
Colloid stability under load, %, not more than: 12
The content of free alkali in recalculation on NаОН, %, not more than: —
Penetration at 25 °С, mm, 10-1: 220-250
The content of water, %, not more than: Absence
Evaporation at 120 °С within 1 hour, %, not more than: 6
Data on operational temperatures represent values, which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mechanical-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

The grease Fiol-1 (TU 38 USSR 201247-80) is a mix of petroleum oils solidified with lithium soap. It contains viscous and antioxidizing additives. The grease Fiol-1 is waterproof, efficient at temperature -40 …+120°С.
Scope: friction units greased through press butterdishes or from centralised system of giving of grease; flexible shaft or management cables in covers; low-power reducers, легконагруженные small-sized bearings of a rolling, etc. The substitute — Fiol-2.

Appearance and colour: Homogeneous smooth ointment from light to dark brown colour
Viscosity effective, Па.с, at 0°С, no more: 200
Viscosity effective, Па.с, at-50°S, no more: 4
Strength at 20°С, the Pas, not less: 250
Strength at 80°С, the Pas, not less: 80
Drobfall temperature, °С, not more low: 185
Colloid stability at loading, %, no more: 25
The content of free alkali in recalculation on NаОН, %, no more: 0.1
Penetration at 0°С, mm, 10-1: 330-380
The content of water, %, no more: Absence
Vaporability at 150°С within 1 hour, %, no more: —

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

The grease Alyumol (TU 38.5901182-89)

Scope: bearings and other friction units of machines and mechanisms. The basic operational characteristics: waterproof, good adhesive properties. It is efficient at temperature-40… +150 °С. Structure: petroleum oil, solidified oil complex aluminium soap; contains antioxidizing, anticorrosive and antiwear additives.

The grease LKMtrans-2 (TU U 00149943.490-96)
Scope: Friction units of vehicles and the industrial equipment.
The basic operational characteristics: a grease LKMtrans-2 is waterproof, anticorrosive, high thermal, mechanical stability, anticorrosive and greasing. It is efficient at temperature from-40 °С to 150 °С; quickly to 170 °С. Structure: the Mix of petroleum oils solidified with complex soap. Contains multipurpose additives.

The grease Fiol-2 (TU 38 USSR 201188-79) is a mix of petroleum oils solidified with lithium soap. It contains viscous and antioxidizing additives. The grease Fiol-2 is waterproof, it is efficient at temperature -40 … +120°С.
Scope: rolling and sliding bearings, tooth gearings of industrial machines and mechanisms, transfers of machine tools, conveyors and other similar devices working at small and average loadings, etc. The substitute is Litiol-24.

Appearance and colour: Homogeneous smooth ointment from light to dark brown colour
Viscosity effective, Па.с, at 0°С, no more: 250
Viscosity effective, Па.с, at-50°S, no more: —
Strength at 20°С, the Pas, not less: 300
Strength at 80°С, the Pas, not less: —
Drobfall temperature, °С, not more low: 180
Colloid stability at loading, %, no more: 16
The content of free alkali in recalculation on NаОН, %, no more: —
Penetration at 0°С, mm, 10-1: 265-295
The content of water, %, no more: —
Vaporability at 150°С within 1 hour, %, no more: —

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.