Grease «Tsentrolita» (TU U 00149943.508-97)
Scope: high-loadeds friction units of the metallurgical equipment with the centralised lubricant system.
The basic operational characteristics: high antioxidizing and thermal stability, anticorrosive and greasing properties. Proof to action of water and water steam. It is efficient in the range of temperatures from -20 °С to 150 °С, it is short-term to 170 °С. It is applied in the centralised lubricant systems.
Structure: petroleum oil solidified with complex lithium soap. Contains multipurpose additives.

Grease «IP-1» (TU 33.101820-80) is cylinder petroleum oil solidified with calcium soap of acids of cotton oil. It contains an antiscuff additive.
It possesses good water resistance and antiscuff characteristics, low frost resistance and mechanical stability, satisfactory colloid stability. It is efficient at temperature 0 … +70°С (),-10 … +70°С (.
Used for bearings of the metallurgical equipment with the centralised giving of grease. A substitute — Uniol-2M-2.

Appearance and colour: —
Viscosity effective, Па.с, at 0°С, no more: 250
Viscosity effective, Па.с, at-40°S, no more: —
Strength at 20°С, the Pas, not less: 200
Drobfall temperature, °С, not more low: 85
Colloid stability at loading, %, no more: 10
The content of free alkali in recalculation on NаОН, %, no more: —
Penetration at 25°С, mm, 10-1: 280-310
The content of water, %, no more: —
Vaporability at 150°С, %, no more: —

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Grease LS-1P (TU 38 USSR 201145-77) is a mix of petroleum oils solidified with lithium soap. It contains antiscuff and antioxidizing additives.
It have water resistance good mechanical stability, antiscuff properties. It is efficient at temperature -40 … +130°С.
Scope: heavy duty friction units foundry, forge-pressovogo and other equipment with the centralised system of giving of grease. Substitutes: Uniol-2, Pressol.

Appearance and colour: —
Viscosity effective, Па.с, at 0°С, no more: 40
Viscosity effective, Па.с, at-30°S, no more: —
Strength at 20°С, the Pas, not less: 100
Drobfall temperature, °С, not more low: 185
Colloid stability at loading, %, no more: 25
The content of free alkali in recalculation on NаОН, %, no more: —
Penetration at 25°С, mm, 10-1: 310-340
The content of water, %, no more: —
Vaporability at 120°С within 1 hour, %, no more: —

Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Grease «Pressol-M» (TU 0254-316-00148820-97) is a mix of petroleum oils solidified with lithium soaps of fat acids with addition of a composition of additives.
It is efficient at temperature -20 … +120°С.
Scope: press-forging equipment and another he heavy duty industrial equipment with the centralised system of giving of grease.
Appearance and colour: —
Viscosity effective, Па.с, at 50°С, no more: —
Viscosity effective, Па.с, at-30°S, no more: —
Strength at 20°С, the Pas, not less: 100
Drobfall temperature, °С, not more low: 150
Colloid stability at loading, %, no more: 25
The content of free alkali in recalculation on NаОН, %, no more: —
Penetration at 25°С, mm, 10-1: 300-360
The content of water, %, no more: —
Vaporability at 100°С within 1 hour, %, no more: —
Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.

Grease «START» (TU 38 401204-81) is a mix of petroleum and synthetic oils solidified with a complex soda soap. It contains anticorrosive and antioxidizing additives.
Grease «START» have high thermal, colloid and antioxidizing stability, satisfactory water resistance. It is efficient at temperature -40 … +140°С.
Scope: bearings of high-speed spindles. A substitute — LKS-2.

Appearance and colour: —
Viscosity effective, Па.с, at 0°С, no more: 35
Viscosity effective, Па.с, at-30°S, no more: —
Strength at 50°С, the Pas, not less: 180-200
Drobfall temperature, °С, not more low: 180
Colloid stability at loading, %, no more: 15
The content of free alkali in recalculation on NаОН, %, no more: —
Penetration at 25°С, mm, 10-1: 300-320
The content of water, %, no more: —
Vaporability at 100°С within 1 hour, %, no more: —
Data on operational temperatures represent values which are guided by a structure of lubricants, and also on a scope and technology of use. Depending on a kind of mehaniko-dynamic loading lubricants change the consistence, conditional viscosity or viscosity at various temperatures, pressure and duration of operation. These changes of indicators can affect work of components.